WARNING
If you experience numbness, tightness or pain at the
implant site, or develop significant skin irritation, or
experience vertigo, stop using your sound processor
and contact your hearing care professional.
1. Remove any old pad from the processor
2. Peel off the single backing strip on the adhesive side of
the pad. (A)
3. Attach the pad to the back of the processor – press down
firmly. (B, C)
4. Peel off the two semicircle backing covers on the cushion
side of the pad. (D)
5. Wear your processor as usual.
D
A
C
B
© Cochlear Limited, 2023 13
To Next Page
Loading...
