TO PAIR YOUR SOUND PROCESSOR TO A WIRELESS
ACCESSORY:
1. Press the pairing button on your wireless accessory.
2. Turn off your sound processor by opening the battery door.
3. Turn on your sound processor by closing the battery door.
4. You will hear an audio signal in your sound processor as a
confirmation of a successful pairing.
TO ACTIVATE WIRELESS AUDIO STREAMING:
Press and hold the button on your sound processor until you
hear an audio signal (See the “Audio and visual indicators”
section on page 24).
TO DEACTIVATE WIRELESS AUDIO STREAMING:
Press and release the button on your sound processor.
The sound processor will return to the previously used
program.
Made for iPhone
Your sound processor is a Made for iPhone (MFi) hearing
device. This allows you to control your sound processor and
stream audio directly from your iPhone, iPad or iPod touch.
For compatibility details and more visit www.cochlear.com.
© Cochlear Limited, 2023 21
To Next Page
Loading...
