Cochlear Osia 2 - Page 17

LEFT
PROCESSOR
POCKET
RIGHT
PROCESSOR
POCKET
ANTI-SLIP
(for forehead)
VELCRO VELCRO
1. Open the headband and lay it flat on a table with the anti-
slip facing up and the pockets facing away from you.
2. Pull the pocket lining out. (A)
3. Insert your processor in the correct pocket. (B)
- Place the left processor in the left-side pocket, the
right processor in the right-side pocket.
- Ensure the top of the processor is at the top of the
pocket.
- Ensure the side of the processor that fits onto your
implant is facing up towards you.
4. Fold the pocket lining back over the processor.
5. Pick up the ends of the headband and place the anti-slip
section against your forehead.
6. Join the ends behind your head. Adjust so the headband
fits firmly, with your processor over your implant. (C)
7. Press firmly on the ends to ensure they join together.
A
CB
© Cochlear Limited, 2023 17