Additional features - Mini Microphone 2+
The Mini Microphone 2+ provides extended audio source connectivity
options. You can stream speech and audio in the following ways:
• from the built-in microphones
• from the built-in Telecoil, receiving audio from an induction loop
system
• from an external FM receiver attached via the built-in 3-pin
Euro pin connector
• from an external, analogue source (PC, laptop, TV etc) connected
via the built-in Line-in connector.
Using the Mode button
The mode button is used to view the current mode, switch between
input modes and check the battery status.
To view the current mode of operation, press the Mode button (on the
back of the Mini Microphone 2+) once. The corresponding LED will light
up for 2 seconds.
Mode LEDs & Icons (2+)
FM Icon
Line-in Icon
Telecoil Icon
Built in Microphone Icon
Mode button (2+)
18 - True Wireless Accessories © Cochlear Limited 2015
Mini Microphone 2 & Mini Microphone 2+
To Next Page
Loading...
