Option 3: Using your sound processor(s)
1. Turn ON your sound processor(s).
2. Turn ON your Mini Microphone.
3. Press and hold the button on your sound processor for 2 seconds,
then release. Your sound processor flashes a blue light
to indicate streaming.
Note: For processors with two buttons, this is the top button.
4. To stop streaming, tap the button on your sound processor.
Using your Mini Microphone
One-to-one communication
The Mini Microphone can be worn by the speaker by clipping
the microphone in a vertical position within 10-40 cm from the
speaker's mouth. Your Mini Microphone provides direct one-to-one
communication with minimal background noise.
Note: Make sure the Status indicator LED on the Mini Microphone is
pointing towards the speakers' mouth when worn this way.
Use as a table microphone (2+ only)
When placed horizontally on a table, your Mini Microphone 2+
automatically switches from directional mode (for one-to-one
communication) to omnidirectional mode to pick up the voices of
multiple speakers.
NOTE
For processors with two buttons,
press the top button to use Wireless
Accessories.
© Cochlear Limited 2015 True Wireless Accessories - 15
Mini Microphone 2 & Mini Microphone 2+
To Next Page
Loading...
