22
•
Each Dive Beginning Statistics:
16 tissue
loading, Local Time Clock, Dive of Day, Dive
Number, Surface Time, Altitude, Time to Fly, and
Battery Voltage. Capacity is the most recent 512
dives.
•
Each Dive Ending Statistics:
16 tissue
loading, Bottom Time, Max Depth, Average
Depth, Min NDC Time, Max Deco Time, Max
Deco Ceiling, Missed Ceiling, Missed Deco
Time, Max Ascent Rate, Max A/R Time, Max A/R
Depth, Min Temperature, Average Temperature,
Maximum Temperature, Min Battery Voltage,
Time to Fly, and number of Warnings. Capacity
is the most recent 512 dives.
•
Each Dive Configuration Data:
Full and
complete configuration of the system, including
User Conservatism. Capacity is the most recent
512 dives.
•
Profile Graphical Information:
Depth Graph,
Ascent Rate Graph, and Temperature Graph.
Capacity is 128 hours (or 550 hours with
expanded memory upgrade) at one second
sampling.
•
Inter-Dive Events:
Number of Initializations,
Unit Activation, Altitude Changes of 500 Feet,
Low Batteries, Sensor Malfunction, Analyst
®
interface with Dive Computer.
INTER-DIVE EVENTS:
The COMMANDER stores
important information between dives, even when the
unit is not turned on. The information is stored as
acquired and is called an “Inter-Dive Event”. These
events can be viewed via the Analyst
®
P.C. Interface
version 3.05 or higher. Some Inter-Dive events are:
• Initialization of the unit.
• The unit is turned on
• Low batteries
• Altitude Changes of over 500 feet
• Sensor Malfunction
• Analyst
®
P.C. Communication
USER CONFIGURABLE ITEMS:
By using the
optional Analyst
®
Personal Computer Interface, the
user has the ability to change the following items:
Caution: Items that can be changed via Touch
Contact Programming may be different from the
factory settings.
Dive Time/date Stamp:
This is the internal clock that
is used by the system to time-stamp each individual
dive as it occurs. Due to changes in battery voltage
and temperature, the internal Time-of-day clock may
To Next Page
Loading...
