Checking External GNSS Input
Copyright © 2013 Coda Octopus Products Ltd
18
F175 MOTION Sensor - Trimble SPS361/SPS461 Integration
5 Checking External GNSS Input
An error will appear in the MOTION Control Message Log if the External GNSS messages are
not being received.
Diagnostic info can also be found in the Connection Properties Dialog where the number of
packets received from the External GNSS will be reported and the Graphical QC which will
display the number of satellites in view for the External GNSS.
Figure 5: Connection Properties - External GNSS
Figure 6: Graphical QC External Sats
To Next Page
Loading...