EasyManua.ls Logo

CodaOctopus F175 MOTION - Chapter 1 Introduction

CodaOctopus F175 MOTION
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction
Copyright © 2013 Coda Octopus Products Ltd
6
F175 MOTION Sensor - Trimble SPS361/SPS461 Integration
1 Introduction
This manual explains how the Trimble SPS361/SPS461 GPS receivers can be used with the F175
System. The Trimble SPS361 and SPS461 are 72-channel dual-frequency DGPS receivers.
TheTrimble SPS361 can achieve an accuracy of 1m over short base-line lengths. The Trimble
SPS461 is a dual antenna system that can also come with RTK as an option and will then
achieve an accuracy of 1cm horizontal.
Tight integration has been performed with the Trimble SPS361/SPS461 using the GSOF output
format. The F175 System is optimised to give maximum performance using the Trimble
SPS361/SPS461.
Configuration Option
SPS361
SPS461
Rover options
-
Optional
Precise horizontal
-
Optional
Precise vertical
-
-
Precise heading/vector
Location RTK
-
Optional
RTCM DGPS
Signal options
L2C
-
Optional
SBAS
Marinestar VBS
Marinestar HP/XP
-
Optional
Beacon
If P/N ends in -30 or -40
If P/N ends in -30 or -40
General options
VRS support
Max data rate
20 Hz
20 Hz
NOTE: Hints and tips are sparsed through the user guide to help you speed up a
process of carrying out an action, or to provide reminders. These are formatted like
this.