EasyManuals Logo

Code 3 XTP Series User Manual

Code 3 XTP Series
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Page 5 of 8
The XTP series light head has been thoroughly factory tested. If any of the the device functions fail, please check the following:
1. Be sure the power source is activated, then check all connections both positive and ground at the light head (to assure no open or shorted
circuits).
2. Permanently connecting the Blue programming wire to ground will disable the light head, no matter what the programmed ash pattern.
3. If the Dim function does not operate, verify the Blue wire is connect to positive.
4. If the sync function is not being used and the light head is functioning erratically, verify the Yellow wire is not connected to positive.
Troubleshooting:

Other manuals for Code 3 XTP Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Code 3 XTP Series and is the answer not in the manual?

Code 3 XTP Series Specifications

General IconGeneral
BrandCode 3
ModelXTP Series
CategoryLighting Equipment
LanguageEnglish

Related product manuals