Code Alarm CA 5051 - Transmitter Button Functions

212010 Audiovox Electronics Corporation. All rights reserved.
9 - Single / Double Pulse Start: Switches the remote start activation between
a single or double press from the transmitter.
10 - IGN 2 Output: Programmable high current output.
Ignition 2 - Ignition output during remote start.
Accessory - Accessory output during remote start.
Start / Crank - Crank output during remote start.
11 - 2 or 3 Hour Start: When activated, the remote start will activate and run for
the programmed time and shut down every 2 or 3 hours.
Transmitter Button Functions
1 Way
Transmitter
Lock Unlock
Car Find /
Panic
Start Operation Method
Lock X
Press and Release
Unlock X
Press and Release
Trunk X
Push and Hold (3 Sec)
Car Finder X
Press and Release
Panic X
Push and Hold (3 Sec)
Remote Start X
Press and Release (1 or 2 times
depending on selectable option)
Remote Start
Shut Down
X
Push and Hold (3 Sec)
Run Time
Extention
X
Press and Release 4 times.
2 / 3 Hour Start X
Ignition ON/OFF, Press and Hold
Valet Button, Press Start 4 times
Daily Start Timer X X
Press Lock + Start