Code Blue ● 259 Hedcor Street ● Holland, MI ● 4923 USA ● 800.205.7186 ● www.codeblue.com Rev 6/2021 page 23 of 57 GU-164-A
SIP Server Settings
Server IP Address: You can use the domain name or IP address of your IP PBX, SIP Gateway, SBC or
whatever you register SIP devices to.
Password: This is the shared SIP secret password that the phone and your SIP registration server share.
Server Port: 0 for auto detect. Commonly may be 5060. If necessary, you may have to specify a port
here.
Advanced SIP Settings
Transport Protocol: IPv4 or IPv6.
Communication Protocol: UDP or TCP.
Registration Lifetime: Default is 600 seconds. This is the time the phone will attempt re-registration if not
contacted by the SIP server.
Keep Alive: Check if you want keep-alive messages sent between the SIP server and the phone.
Use a Proxy Server: If using a proxy server in addition to a SIP server, then specify the IP Address
or Domain, SIP Authentication ID and Outbound Proxy Port used.
To Next Page
Loading...
