Code Blue ● 259 Hedcor Street ● Holland, MI ● 4923 USA ● 800.205.7186 ● www.codeblue.com Rev 6/2021 page 44 of 57 GU-164-A
Configuring for Cisco Unified Call Manager
1. PREPARATION
1. Record the MAC address and determine the current IP address for each LS1000 device you wish to
use with CUCM.
2. Determine which partition you will put the LS1000 directory numbers into.
3. Obtain one directory number for each Ce LS1000 device.
a. If you are going to use the LS1000’s dual account configuration to register to redundant
CUCM servers, obtain a second directory number for each LS1000 device.
4. Determine which calling search space you will assign to the LS1000.
2. LS1000 CONFIGURATION
3. Configure Account(s)
1. Log in to LS1000 via its web interface. The default username and password are admin and
admin.
2. Select Account 1.
3. For VoIP Protocol, select SIP and RTP.
4. Under SIP Configuration, for Username/Number enter the directory number assigned in the
CUCM.
5. For Display Name, enter caller ID text.
6. For Domain, enter the hostname or IP address of the CUCM subscriber you wish to register
this account.
7. Insure Keep-Alive is enabled.
8. For Password, enter the password you entered into Digest Credentials under the CUCM
end user.
9. Click Save.
10. Repeat steps 3-9 with Account 2 if you are using the second account.
To Next Page
Loading...
