Need help?Do you have a question about the Code Blue LS1000 and is the answer not in the manual?
Presents the different configurations of the LS1000 speakerphone.
Explains legal requirements for call recording notifications to parties.
Lists the main technical features and capabilities of the LS1000 device.
Details power consumption for LS1000 models and accessories across different voltages.
Outlines legal considerations, liability, and regulatory requirements for installation.
Covers important safety instructions, warranty terms, and product disposal.
Lists the essential tools needed for installing the LS1000 faceplate.
Step-by-step instructions for flush mounting the LS1000 enclosure.
Step-by-step instructions for surface mounting the LS1000 enclosure.
Detailed steps for replacing existing connectors with Wago connectors.
Description of WAN, LAN ports, inputs, outputs, and reset switch connections.
Dimensional drawings and layouts for flush mounting the LS1000.
Guide to finding the LS1000's IP address via DHCP or network scanner.
Configuration steps for SIP or Peer-to-Peer accounts, including volume.
Options to enable and set resolution for SIP video transmission.
Details on setting the SIP server IP address, domain, and port.
Configuration for transport protocol, communication protocol, and registration lifetime.
Settings for RTP port range and choosing audio codecs for calls.
Information on the RTSP stream format for accessing camera feeds.
Configure actions triggered by physical buttons or auxiliary inputs.
Options to trigger auxiliary outputs, initiate calls, or play messages.
Set up automatic dialing, account selection, and call rollover for outgoing calls.
Details how to use DTMF tones for adjustments during an active call.
Set up playing custom audio messages as part of action scripts.
Uploading PEM certificates and keys for secure HTTP server access.
Changing the administrator password and rebooting the LS1000 device.
Configure SNMP server, port, and community names for trap destination.
Define intervals for power, battery, and mic/speaker test diagnostics.
Customize button functions, modes, and ring LED colors.
Adjust the brightness and blink rate of the station light.
Prerequisites and information gathering for CUCM setup.
Step-by-step process for configuring LS1000 accounts within CUCM.
Adding the LS1000 as a phone device and assigning directory numbers in CUCM.
Addresses issues related to power, PoE, network connectivity, and ports.
Common problems with SIP account setup and firewall interference.
Introduction to the Blue Alert MNS for emergency response management.
Details on the Event Management System for device control and integration.
Steps to secure the J-box to a pole using banding and mounting screws.
Instructions for connecting the strobe light to its bracket and J-box.
Wiring connections and operational modes for LED beacon/strobes.
Table listing available mode combinations and flash rates.
Details power draw in different modes and voltages.
Routine checks for functional communications and unit operation.
Periodic visual inspections of lighting, faceplate, and batteries.
Faceplate removal for electrical connection checks and cleaning.
Legend to classify the severity of environmental pollutants.
Recommended cleaning frequencies for painted and stainless steel surfaces.
Procedures for contacting support for breakdowns or unusual unit behavior.
General| Brand | Code Blue |
|---|---|
| Model | LS1000 |
| Category | Intercom System |
| Language | English |
To Next Page
