Code Blue ● 259 Hedcor Street ● Holland, MI ● 4923 USA ● 800.205.7186 ● www.codeblue.com Rev 6/2021 page 39 of 57 GU-164-A
Diagnostics
With SNMP Traps enabled, enter the SNMP server name, port number (162 by default) and Read/Write
Community Names.
Each trap can be enabled or disabled to customize the output.
The time interval for Power, Microphone and Speaker can be adjusted. By default, these are set to 900
seconds for Power Failure tests and 0 Seconds (Disabled) for Mic/Speaker tests. The volume of the
Mic/Speaker test can be adjusted via a drop-down menu.
To Next Page
Loading...
