Code 2600 Guide

6
C007995_05_CR2600_CongurationGuide
CR2600 Conguration Guide
NOTE: The conguration change will take effect immediately and saved to memory.
USB Downloader Mode
Reset Reader to
RF Factory Defaults
USB Keyboard Mode
(Batch Mode Only)
USB Virtual COM -
1 way Mode (Batch Mode Only)
Read High Density Field OnlyRead Wide Field Only
Read Both Wide and
High Density Field - Default
Enable Alternative OS
(Windows CE/MAC/Linux)
- Batch Mode ONLY
Disable Alternative OS
- Batch Mode Only - Default
Reader Text
Commands On
Reader Text
Commands Off - Default
Batch Mode Enable
- Send and Log
Batch Mode Disable - Default
Batch Mode Enable
- Log Only
USB Speed - High Speed
(Reader in Batch Mode ONLY)
- Default
USB Speed - Full Speed
(Reader in Batch Mode ONLY)
Continuous Scan
Off - Default
Continuous Scan On
Clear All JavaScript RulesClear All Stored Data
and Images and Reboot
Save All Reader Settings
Intentionally Left Blank
Targeting On - Default
Targeting Off

Code 2600 Specifications

General

Operating Temperature	0°C to 50°C (32°F to 122°F)
Voltage	5 VDC ± 10%
Resolution	4 mil
Interface	USB, RS232, Keyboard Wedge
Supported Barcodes	Code 39, Code 128, UPC/EAN, Interleaved 2 of 5, Codabar, MSI
Humidity	5% to 95% (non-condensing)