Code CR1100 - RS232 Settings; Enable RS232 Interface Flow Control - One-Way M2; Enable Serial, Raw, and Echo Communications M2; Reset to RS232 Factory Defaults M2

13898 Configuration Guide
16
rs232-settings
Enable RS232 Interface Flow Control -
One-Way M2
Enable Serial, Raw, and Echo
Communications M2
Reset to RS232 Factory Defaults M2
rs232-settings
RS232 Interface - 1 Stop Bit - Default
M2
RS232 Interface - 115200 Baud Rate -
Default M2
RS232 Interface - 1200 Baud Rate M2
rs232-settings
RS232 Interface - 19200 Baud Rate
M2
RS232 Interface - 2 Stop Bits M2 RS232 Interface - 2400 Baud Rate M2
rs232-settings
RS232 Interface - 38400 Baud Rate
M2
RS232 Interface - 4800 Baud Rate M2 RS232 Interface - 57600 Baud Rate
M2
rs232-settings
RS232 Interface - 7 Data Bits M2 RS232 Interface - 8 Data Bits -
Default M2
RS232 Interface - 9600 Baud Rate M2