Code CR1100 - Enable GS1 DataBar Expanded - Default M2; Enable GS1 DataBar Expanded Stacked - Default M2; Enable GS1 DataBar Limited - Default M2; Enable GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional - Default M2

13898 Configuration Guide
23
symbology-settings
Enable GS1 DataBar Expanded -
Default M2
Enable GS1 DataBar Expanded Stacked
- Default M2
Enable GS1 DataBar Limited - Default
M2
symbology-settings
Enable GS1 DataBar Stacked and GS1
DataBar Stacked Omnidirectional -
Default M2
Grid Matrix Inverse Off - Default M2 Grid Matrix Inverse On M2
symbology-settings
Grid Matrix Mirror Off - Default M2 Grid Matrix Mirror On M2 Grid Matrix Off - Default M2
symbology-settings
Grid Matrix On M2 GS1 DataBar Off M2 GS1 DataBar On - Default M2
symbology-settings
Han Xin Inverse Off - Default M2 Han Xin Inverse On M2 Han Xin Mirror Off - Default M2