Code CR1428 User Manual

4/14/2016
D014465 CR1400 CR1000 CR2300 CR2600 CR3600 CR44X5 CR8000 CR900FD CR6000 CR5000 T500 Client Version ICD
Page 83 of 106
© 2013-2016 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  (801) 495-2200  FAX (801) 495-0280
Reg
Setting Name
Default (Hex)
Comment
29D
Sled Battery Reserve
Level (%)
28
(#40)
Valid Range: 0 to 64 (#100) Percent
Only applies to charging mode 2 in charging mode register 284.
Sled will charge device battery until sled battery drops below
the percentage value in this register.
Note: Supported on CR4405 only.
Keywords: #Battery
29E
Lower battery percent
scaling (%)
0
Valid Range: 0 to 64 (#100) Percent
Reader will report 0% battery capacity if the actual battery
drops below this percent.
Keywords: #Battery
29F
Upper battery percent
scaling (%)
64
(#100)
CR4405:
5A
(#90)
Valid Range: 0 to 64 (#100) Percent
Reader will report 100% battery capacity if the actual battery
rises above this percent.
Keywords: #Battery
2A3
Code 49 Symbology
0
0: Disabled
1: Enabled
2A8
Use demo script
0
CR3600:
1
0: Disabled
1: Enabled
If Enabled on a device that has a display, this setting will cause
the device to use the demo script instead of the “.default.js”
script.
Persistence: Protected
2AB
Detect charging base
as Stand
0
0: Disabled
1: Enabled
If Enabled, for readers with a charging base, the reader will be
considered In-Stand if the reader is in the charging base.
Note: Applies to Bluetooth® readers only.
Keywords: #Stand, #StandDetect

Code CR1428 Specifications

General

Brand	Code
Model	CR1428
Category	Barcode Reader
Language	English