Code CR2600 - Basic Operations; Powering On;Off the Reader; Scanning Barcodes

A1 A4A2 A3
B1 B2 B3
C1 C4C2 C3
D1 D4D2 D3
E1 E4E2 E3
B4
CR2600 Configuration Guide
NOTE: Configuration changes will take effect immediately and be saved to memory
Web Generated Configuration Guide
For questions regarding reader configuration contact support@codecorp.com.
8
USB Virtual COM One Way
Mode
USB Speed High Speed - Batch
Mode Only - Default
USB Speed Full Speed - Batch
Mode Only
Intentionally Blank
Preemptive Mode On Preemptive Mode Off - Default Reader Paging On - Default
General Modem
Settings
Reader Paging Off Continuous Scan On Continuous Scan Off - Default
General Reading Mode
Settings
Mountable Palm Charger Motion
Detection - On
Mountable Palm Charger Motion
Detection - Off
Anti-Glare On Anti-Glare Off - Default
Mirroring On Mirroring Off - Default Targeting On - Default Targeting Off