Code CR900FD User Manual

4/14/2016
D014465 CR1400 CR1000 CR2300 CR2600 CR3600 CR44X5 CR8000 CR900FD CR6000 CR5000 T500 Client Version ICD
Page 41 of 106
© 2013-2016 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  (801) 495-2200  FAX (801) 495-0280
Reg
Setting Name
Default (Hex)
Comment
41
Text Commands
8
Binary Dip Switch
Bit
Controls
Value
0
Text Commands
0: Disabled
1: Enabled
1
Suppress Echo
0: Disabled
1: Enabled
2
Suppress Responses
0: Disabled
1: Enabled
3
Disable Text Commands but
Enable Magic Sequence; See
Below
0: Disabled
1: Enabled
4
Suppress URL Decode; See
Below
0: Disabled
1: Enabled
5
Accept On Timeout
0: Disabled
1: Enabled
Magic Sequence:
The Magic Sequence is the string “;>PAx” where x is 1, 3, or 7
as defined above. This would normally be used in command
text files, which would begin with the text-command-on
sequence and end with the command to return to this special
mode. For example:
;>PA7
;any desired commands here
PA8
Suppress URL Decode:
For example, if enabled, P%418 will not equal PA8.
The % is not recognized as an escape character
Accept On Timeout:
Note: See register 156 for details
Keywords: #TextCommands

Code CR900FD Specifications

General

Brand	Code
Model	CR900FD
Category	Barcode Reader
Language	English