Code CR900FD - Page 68

4/14/2016
D014465 CR1400 CR1000 CR2300 CR2600 CR3600 CR44X5 CR8000 CR900FD CR6000 CR5000 T500 Client Version ICD
Page 68 of 106
© 2013-2016 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  (801) 495-2200  FAX (801) 495-0280
Reg
Setting Name
Default (Hex)
Comment
243
USB Keyboard
Connection Delay (ms)
0
CR2300:
CR2600:
CR2600XHD:
CR3600:
CR3600DPM:
CR4405:
1388
(#5000)
Valid Range: 0 to 7FFFFFFF (#2147483647) Milliseconds
This is the additional amount of time that the reader will wait
after connecting before sending data. The delay will only be
used with the associated communication mode.
Keywords: #Communications
244
USB HID Native
Connection Delay (ms)
0
Valid Range: 0 to 7FFFFFFF (#2147483647) Milliseconds
This is the additional amount of time that the reader will wait
after connecting before sending data. The delay will only be
used with the associated communication mode.
Keywords: #Communications
245
USB VCOM Connection
Delay (ms)
0
Valid Range: 0 to 7FFFFFFF (#2147483647) Milliseconds
This is the additional amount of time that the reader will wait
after connecting before sending data. The delay will only be
used with the associated communication mode.
Keywords: #Communications
246
USB HIDPOS
Connection Delay (ms)
0
Valid Range: 0 to 7FFFFFFF (#2147483647) Milliseconds
This is the additional amount of time that the reader will wait
after connecting before sending data. The delay will only be
used with the associated communication mode.
Keywords: #Communications
247
Bluetooth® Connection
Delay (ms)
0
Valid Range: 0 to 7FFFFFFF (#2147483647) Milliseconds
This is the additional amount of time that the reader will wait
after connecting before sending data. The delay will only be
used with the associated communication mode.
Keywords: #Communications
249
Serial UART Connection
Delay (ms)
0
Valid Range: 0 to 7FFFFFFF (#2147483647) Milliseconds
This is the additional amount of time that the reader will wait
after connecting before sending data. The delay will only be
used with the associated communication mode.
Keywords: #Communications