Code CR900FD - Page 87

4/14/2016
D014465 CR1400 CR1000 CR2300 CR2600 CR3600 CR44X5 CR8000 CR900FD CR6000 CR5000 T500 Client Version ICD
Page 87 of 106
© 2013-2016 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  (801) 495-2200  FAX (801) 495-0280
Reg
Setting Name
Default (Hex)
Comment
2BE
In-Stand Event
0
CR2300:
CR2600:
CR2600XHD:
CR3600:
CR3600DPM:
F2
(#242)
CR5000:
CR5000RTC:
F4
(#244)
This event will be posted when the reader is placed in its stand
(for CR5000 & CR5000RTC, when it is placed on a surface).
See register C4 for a list of events.
Note: Applies to Bluetooth® and CR5000 & CR5000RTC readers
only.
Keywords: #Stand, #StandModes, #StandDetect,
#DefaultEvent
2BF
Out-of-Stand Event
0
CR2300:
CR2600:
CR2600XHD:
CR3600:
CR3600DPM:
F2
(#242)
CR5000:
CR5000RTC:
F5
(#245)
This event will be posted when the reader is removed from its
stand.
See register C4 for a list of events.
Note: Applies to Bluetooth® and CR5000 & CR5000RTC readers
only.
Keywords: #Stand, #StandModes, #StandDetect,
#DefaultEvent
2C0
In-Stand Target
Tolerance
640
(#1600)
When the reader is placed on a surface and Stand Detection is
enabled, register 9D will be set to the value in this register.
Note: Applies to CR5000 & CR5000RTC readers only.
Keywords: #Stand, #StandModes
2C1
Out-of-Stand Target
Tolerance
640
(#1600)
When the reader is lifted up and Stand Detection is enabled,
register 9D will be set to the value in this register.
Note: Applies to CR5000 & CR5000RTC readers only.
Keywords: #Stand, #StandModes