Code Reader CR1100 User Manual

7
7.0 - Reader Feedback
8.0 - Symbologies Defaulted On 9.0 - Symbologies Defaulted Off
The following are symbologies that have a default of ON.
To turn symbologies on or off, scan the symbology
barcodes located in the CR1100 Configuration Guide on
the product page at codecorp.com.
Aztec
Codabar
Code 39
Code 93
Code 128
Data Matrix
Data Matrix Rectangle
All GS1 DataBar
Interleaved 2 of 5
PDF417
QR Code
UPC/EAN/JAN
Micro PDF417
MSI Plessey
NEC 2 of 5
Pharmacode
Plessey
Postal Codes
Standard 2 of 5
Telepen
Trioptic
Code barcode readers can read a number of barcode
symbologies that are not enabled by default. To turn
symbologies on or off, scan the symbology barcodes located
in the CR1100 Configuration Guide on the product page at
codecorp.com.
Codablock F
Code 11
Code 32
Code 49
Composite
Grid Matrix
Han Xin Code
Hong Kong 2 of 5
IATA 2 of 5
Matrix 2 of 5
Maxicode
D032078 _02 CR1100 User Manual
Scenario Top LED Light Sound
CR1100 Successfully Powers Up Green LED Flashes 1 Beep
CR1100 Successfully Enumerates with Host (via cable) Once Enumerated, the Green
LED turns Off
1 Beep
Attempting to Decode Green LED Light is Off None
Successful Decode and Data Transfer Green LED Flashes 1 Beep
Conguration Code Successfully Decoded and Processed Green LED Flashes 2 Beeps
Conguration Code successfully decoded but wasn’t
successfully processed
Green LED Flashes 4 Beeps
Downloading File/Firmware Amber LED Flashes None
Installing File/Firmware Red LED is On 3-4 Beeps*
*Depending on comm port conguration

Code Reader CR1100 Specifications

General

Brand	Code
Model	Reader CR1100
Category	Barcode Reader
Language	English