28.4 Restore All Active Periods for Specific Code Client
Note: This Program is available to both the Master and Sub-Master codes.
#Master Code•28•4• 1199••
Example:#12345678•28•4•1199••
Result:Restores all the Active Periods for Client with Code 1199.
28.5 Suspend All Active Periods for All Clients
Note: This Program is available to both the Master and Sub-Master codes.
Note:Includes Code and Smart Card clients.
#Master Code•28•5••
Example:#12345678•28•5••
Result:All Active Periods suspended.
28.6 Restore All Active Periods for All Clients
Note:This Program is available to both the Master and Sub-Master codes.
Note:Includes Code and Smart Card clients.
#Master Code•28•6••
Example:#12345678•28•6••
Result:All Active Periods restored
NetCode
Create codes with a specific start date & time and that automatically expire after a set duration.
52 Block a Specific NetCode
Note:A specific NetCode can be manually blocked using the Master Code.
#Master Code•52•NetCode to Block••
Example:#Master Code•52•412682••
Result:The NetCode 412682 is now blocked
GuestLock
Simple access control for guest houses and B&B.
The GuestLock feature allows a guest to choose their own 4 digit Code (GuestCode) by prefixing their
chosen GuestCode with that particular locks GuestCode prefix. The GuestLock feature must be enabled
before use.
60 Enable GuestLock
Note:Enabling GuestLock sets the prefix for the specific lock.
#Master Code•60•748•748••
To Next Page
Loading...
