COE S7 - Page 54

No. DESCRIPTION PART NUMBER QTY
CARRIAGE ASSEMBLY (CONTINUED)
9 ROLL CYLINDER PIN (LOWER) 13330 1
10 COE SPEC SUN BODY XVI CONVERSION 14634 1
11 COUNTER BALANCE VALVE 2599 1
12 ADAPTER MB-MJ90-6-4 921 2
13 CARRIAGE MAST 1548 1
14 CARRIAGE MAST RETAINER PLATE 13197 1
15 RUBBER BUMPER 6802 2
16 2 X 30 TRUNION MOUNT (1.5” PIN TRUNNION) 14790 1
17 ADAPTER MB-MJ90-8-8 925 2
18 TRUNION CYLINDER MOUNT EAR (RIGHT) 14791 2
19 TRUNION CYLINDER MOUNT EAR (LEFT) 14792 1
20 FRONT RETAINER CAP UHMW (BLACK) 13820 1
21 REAR RETAINER CAP UHMW (BLACK) 13821 1
22 SLIDE WEAR PLATES 1/2” (RED) 6835 2
23 SLIDE WEAR PLATES 3/8” (RED) 6836 2
STEERING KNUCKLE ASSEMBLY
1 STEERING KNUCKLE W/FENDER
2 BALL JOINT BEARING 1021 2
3 1 5/8 SPECIALTY BOLT 1123 2
4 1 5/8 SPECIALTY JAM NUT 1120 2
5 NYLATRON SHIM 6885 1
6 GREASE ZERT 2
RETURN FILTER
1 RETURN TANK FILTER (FILTER ELEMENT) 5265 (13180) 1
2 ADAPTER MB-MJ90-16-12 930 1
3 ADAPTER MJ-MB-MJT-16 937 1
4 1" SAE PLUG RBG-16 13531 1
SUCTION FILTER
1 ALUMINUM HEAD 5261 1
2 SPIN ON FILTER 10 MICRON 5262 1
3 ADAPTER MB-MJ-16-16 915 2
SHAKE CLAMP BULKHEAD
1 MJ-MJH45-12-12 784 2
2 MJ-MJH45-16-16 785 2
3 MJ-MJH-8-8 778 1
4 MJ-MJH45-4-4 781 1
5 HN-16 982 2
6 HN-12 981 2
7 HN-8 980 1
8 HN-4 978 1
9 BULK HEAD PLATE (SHAKE/CLAMP) 6721 1
IN-OUT / TILT BULK HEAD
1 MJ-MJH45-4-4 781 2
2 MJ-MJH45-8-8 783 2
3 HN-8 980 2
4 HN-4 978 2
Parts
51
Miscellaneous parts