COE S7 - Cab Area Descriptions

Cab Descriptions
Suspension Seat
The suspension seat has multiple adjustments to set the seat to a comfortable operat-
ing position. Fore-aft, backrest tilt, height and suspension weight. DO NOT adjust seat
while in motion.
Joy Stick Control
The Joy stick controls the shaker head extension and retraction and up and down. The
joy stick grip contains the push buttons to operate the clamping, shake and roll func-
tion. (diagram following page)
Propulsion Pedal
The propulsion pedal controls the direction of travel for the shaker. Depressing the
pedal to the left activates forward to the right reverse. Releasing the pedal will bring the
shaker to a stop.
Throttle pedal & Secondary adjustable fixed throttle
The throttle pedal & secondary throttle controls the engine RPM. Use the secondary
throttle to set a fixed engine rpm for operation and use the foot throttle to increase
rpms when needed.
Steering column
The steering column is tilt adjustable. To Tilt wheel push on the lower portion of the
rubber boot as indicated. Move wheel to desired position and release.
Cooled storage
The cooled storage operates when the AC is on. DO NOT store perishable items in the
storage box.
Instruments and control panel
The instrument panel contains all vital information for the shaker. The GEM monitor is
a multi function interface that displays vital engine information as well as any engine
fault codes. The GEM can be programmed to display only the information that the op-
erators prefers. Refer to the booklet in this manual on the GEM monitor. The instru-
ment panel also has pressure gauges for the hydraulic functions of CLAMP, MAIN and
CHARGE. The AM/FM CD stereo is located in the same area as the AC temp and
blower controls. Rocker switches in the control panel are for SWEEPERS, CAB PRES-
SURIZER, LIGHTS and HIGH-LOW GEARS. The ignition switch is also located in the
console panel. Low oil light on dash indicates flow level of hydraulic reservoir.
NOTE:
On models with the COE Excelerate system the hydraulic pressure gauge func-
tions are integrated in the color monitor. Please refer to the Excelerate manual
for additional features and use.
Operation
6