Cognex DM363X - Symbols; About the Dataman 360 Reader; Supporting Documentation

Symbols
The following symbols indicate safety precautions and supplemental information:
WARNING: This symbol indicates a hazard that could cause death, serious personal injury or electrical shock.
CAUTION: This symbol indicates a hazard that could result in property damage.
Note: This symbol indicates additional information about a subject.
Tip: This symbol indicates suggestions and shortcuts that might not otherwise be apparent.
About the DataMan 360 Reader
The DataMan 360 series readers are high-performance, fixed-mount ID readers that offer:
l Highest Read Rates on 1-D and 2-D codes
l Most flexible optics and lighting
l Intelligent tuning and express setup
The DataMan 360 series readers provide advanced Ethernet connectivity, support for serial RS-232 and discrete I/O,
and advanced options for lighting and optics.
The DataMan 360 series readers are packaged in a rugged, IP-rated housing, and provide numerous ease-of-use
features, including one button to trigger and one to start tuning.
Supporting Documentation
This document provides basic information about the DataMan 360 series readers. Additional information is available
through the Windows Start menu or the DataMan Setup Tool Help menu after you install the DataMan software on your
PC:
l The DataMan Communications and Programming Guide shows you how to integrate your DataMan reader into
your particular automation and factory environment.
5
Symbols