13
4 Specifications
The specifications of the In-Sight Strobe Light Adapter are presented in the following
two sections.
G Summary of Specifications
G Mechanical Specifications
4.1 General Specifications
FEATURE DESCRIPTION
Part Number CLA-1000-00
Light Output Jacks Two 7-pin DIN output jacks compatible with Cognex light modules.
Strobe Output Generates a 10 mA (minimum) pulse with a duration of two horizontal lines (128
microseconds)
Light Pulse Width 10 to 290 microseconds (in 10-microsecond increments)
Hardware Triggers Via In-Sight camera or Discrete I/O
Software Triggers Manual or Continuous
Power Supply No external power supply is required; 24VDC power supplied by the In-Sight
Processor.
Cable Length: 3.96 m (13 ft.)
Field Wiring Size: 22 AWG
Mechanical Dimensions: 144.3 mm (5.68 in.) depth, 113.5 mm (4.47 in.) width, 41.7 mm (1.64
in.) height.
Weight (including cable): 0.54 kg (1.2 lbs).
Mount via four 5.2 mm (0.203 in.) wide slots.
Environmental
• Operating temperature: 10°C to 50°C (50°F to 122°F)
• Operating humidity: 10 to 90% non-condensing
• Storage temperature: –10°C to 65°C (14°F to 149°F)
• Storage humidity: 10 to 90% non-condensing
Approvals CE
To Next Page