Need help?Do you have a question about the Cognex IN-SIGHT and is the answer not in the manual?
Connects the Strobe Adapter power and control cables to the In-Sight processor and camera.
Adjusts light pulse duration using X10 and X100 controls for optimal illumination.
Configures hardware (Camera, Discrete I/O) and software triggers for the strobe operation.
Verifies connections, wire security, cable connections, and light module functionality for strobing issues.
Provides a general overview of the Strobe Light Adapter's features and capabilities.
Details the physical dimensions, weight, mounting, and environmental operating conditions.
Connects the Strobe Adapter power and control cables to the In-Sight processor and camera.
Adjusts light pulse duration using X10 and X100 controls for optimal illumination.
Configures hardware (Camera, Discrete I/O) and software triggers for the strobe operation.
Verifies connections, wire security, cable connections, and light module functionality for strobing issues.
Provides a general overview of the Strobe Light Adapter's features and capabilities.
Details the physical dimensions, weight, mounting, and environmental operating conditions.
General| Category | Vision System |
|---|---|
| Interface | Ethernet |
| Processor | Varies by model |
| Operating System | Embedded Linux |
| Software | In-Sight Explorer |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Power Supply | 24V DC |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Protection Rating | IP67 |
| Resolution | Varies by model (e.g., 640x480 to 1600x1200) |
To Next Page