Cointra CADI Series - Replacing CADI Heater Batteries

EN
65
cod. 3542C090 - Rev. 01 - 09/2022
CADI
3.3.2 Opening the casing
Before performing any opera-
tions inside the heater, close
the gas cock.
To open the casing:
• Unscrew the 1 screws and remove the knobs 2.
• Slightly rotate the casing 3 and disconnect the cable 4
of the Display.
• Remove the casing 5 and 6.
1
1
2
2
6
4
3
5
g. 17 - Opening the casing
3.4 REPLACING THE BATTERIES
To change the batteries, proceed as described in g. 18.
g. 18 - Opening the battery box