COLBOR CL330 - CL330 Product Overview; Light Installation and Accessory Mounting; Removing Lamp Cap Protection Cover; Attaching and Detaching the Reflector

Product Instructions
① LED Display Screen
② EFF Mode Button
③ EFF Rate Option Button
④ CCT Mode Button
⑤ Settings Button
⑥ Option Adjustment Knob
⑦ Parameter Adjustment Knob/
Parameter Preset
⑧ DC 48V Power Port
⑨ Power Button
⑩ Bowens Mount
⑪ COB Lamp Beads
⑫ Lamp Angle Adjustment Locking Grip
⑬ Bracket
⑭ Air Outlet
⑮ NATO Slideway
⑯ Air Inlet
⑰ Lamp Grip
⑱ Soft Light Cover Hole
⑲ Soft Light Cover Hole Screws
⑳ Bracket Screw
Light Installation
Hold the COB cover with the Bowens Mount
tenon and rotate it as the direction of the arrow.
Note: Be sure to remove COB protective cover
and COB protective lm before use.
Installation of reector: Align the reector with the groove around the lamp
head and clip it in, turn the reector as the direction of the arrow, and the
reector installation will be completed after the top rod rebounds.
Removal of reector: Under the instructions of “Lamp Cap Protection Cover
Removal".
1. Removal of lamp cap protection cover
2. Installation and removal of reector