(4) Power with V-port battery
Mount the V-port battery to the lamp by complimentary the NATO expansion
bar with VM3 (optional), and then connect the D-tap to XLR power cable to
start the lamp.
Note:
*Under the condition of one 14.8V battery power supply, the maximum
brightness of the product is 60% of the full power.
*When the battery capacity is insufficient, the brightness of the product light
will be adapted to reduce the power to avoid the danger of overheating of the
power cord due to excessive current.
* It is recommended to use the dual V battery power supply.
To Next Page
Loading...
