COLBOR CL330 - EFF Mode: Special Effects Operation; Adjusting EFF Mode Parameters and Presets; Cycling Through Light Effect Modes

3. EFF Mode (Short press EFF Mode Button to enter)
Press to switch light eect: Fire → CCT Chase → Pulsing →
Pulsing → TV → Explosion → Faulty Bulb → Welding → Strobe →
Lightning → S.O.S
Light Eect Mode (EFF) Button
Turn the knob clockwise or anti-clockwise to adjust options: color
temperature, brightness, Chromatic Aberration Compensation.Knob
left and right in the same direction can be rotated option
Turn the knob clockwise or anti-clockwise to adjust parameter
of color temperature, brightness and Chromatic Aberration
Compensation :
Brightness (DIM): 0%~100%
Color temperature: 2700-6500K
Chromatic Aberration Compensation: Green10~1-0-Red1~10
Press down the knob to quickly switch the preset parameter
of color temperature, brightness and Chromatic Aberration
Compensation :
Preset brightness：0%、25%、50%、75%、100%
Preset color temperature：2700K、3200K、4000K、5600K、
6500K
Chromatic Aberration Compensation: Short press return to zero
Option Adjustment Knob
Parameter Adjustment Knob/Parameter Preset
Rate
Special Eect
Color Temperature
Brightness
G/R Compensation
EFF Mode Button
Rate Option Button