Cold Jet i3 MICROCLEAN 2 - Precision Applicator Components; Applicator and Nozzle Overview

10
Precision Applicator Components
Applicator Lights
Trigger
Trigger Safety
Nozzle
Applicator Control Cable
Blast Hose Connection
Applicator Controls
Precision Applicator Nozzles
Nozzle Air Consumption Blast Swath Dry Ice Feed Rate Length Material
(MC13)
Yellow
12 CFM@80 psi
(0.3 m
3
/min 5.5 bar)
0.13 in
(.3 cm)
0.1-0.4 lbs/min
.05-0.2 kg/min
6 in
(15.2 cm)
Plastic
(MC19)
White
30 CFM@80 psi
(0.8 m
3
/min 5.5 bar)
0.19 in
(.5 cm)
0.2-1.0 lbs/min
0.1-0.5 kg/min
6 in
(15.2 cm)
Plastic
(MC31)
Blue
50 CFM@80 psi
(1.5 m
3
/min 5.5 bar)
0.31 in
(.8 cm)
0.5-1.2 lbs/min
0.2-0.6 kg/min
6 in
(15.2 cm)
Plastic
Fan Nozzles
(MC47)
25 CFM@80 psi
(0.7 m
3
/min 5.5 bar)
Fan
0.47 in
(1.2 cm)
0.2-1 lbs/min
0.1-0.5 kg/min
6 in
(15.2 cm)
Plastic &
Aluminum
(MC28)
25 CFM@80 psi
(0.7 m
3
/min 5.5 bar)
Fan
.28 in
(.7 cm)
.2-1 lbs/min
0.1-0.5 kg/min
6 in
(15.2 cm)
Plastic &
Aluminum
(MC35)
25 CFM@80 psi
(0.7 m
3
/min 5.5 bar)
Fan
0.35 in
(.9 cm)
0.2-1 lbs/min
0.1-0.5 kg/min
6 in
(15.2 cm)
Plastic &
Aluminum