Cold Jet i3 MICROCLEAN 2 - Operations; Unpacking the i³ MicroClean 2 System

15
Operations
Unpacking the i
3
MicroClean 2 System
This machine has been assembled and tested as one unit prior to shipment. Follow the steps below to
inspect and unpack the machine from the shipping container.
1. Examine the shipping container for any damages that may have occurred during transport.
2. Remove the machine, recyclable box(es) that contain accessories, and the packaging can be
recycled.
3. Examine the machine for any external damage that may have occurred during transport.
4. Remove the back housing of the machine and examine the machine for any internal damage
that may have occurred during transport.
Refer to the packing slip for a list of the components shipped with the machine. Contact Cold Jet if any
damage has occurred to the shipping container or the machine (see “Contact Information” on page
58).
The following sections describe the unpacking, moving and transporting, and operations of the i
3
MicroClean 2. Read and follow all instructions prior to using the i
3
MicroClean 2.
WARNING Only trained and or certied personnel should operate or rig the i
3
MicroClean 2
for shipment or movement.