Cold Jet i3 MICROCLEAN 2 - Final Shutdown and Disconnection

29
4. Turn o the compressed air supply. The MicroClean 2 will automatically bleed any remaining
pressure.
There is no need to bleed the air pressure from the MicroClean 2. The
MicroClean 2 automatically bleeds air pressure during proper shut down
of the MicroClean 2. It also automatically bleeds for approximately two
seconds every 30 minutes of trigger time during operation.
5. When all the air pressure is bled o, disconnect the air supply hose from the MicroClean 2.
6. Unplug the power cord from the MicroClean 2 by depressing the tangs on the cord collar.
7. If transporting the MicroClean 2 to a dierent location, disconnect all cables and hoses from
the MicroClean 2 rst and stow them on retractable hooks.
8. If storing the MicroClean 2, disconnect all cables and hoses and stow them on retractable
hooks. Store the MicroClean 2 in a dry space free of dirt and debris. Keep out of direct
sunlight.