Coldelite UF-253G - Machine Placement and Water-Cooled Condensers; Positioning the Machine; Machines with Water Cooled Condensers

Page
PART I .
PART- I I
PART I11
PART IV
PART V
PART VI
A) L!ni i at lny
B) l'osit ioninq the Machine
C) Machines wlth Water Cooled Condensers
Kater Va lvc Adjustment
\<AHSING
D) Msct~ines with Air Cooled Condensers
El Electrical. Connections
Electrical Requirements
Beater Kvtatlon
IYI:(?HTAN'I' - WARSING INFORMATION
EXI-'L.ANA'I'IOX Of.' ELECTRICAL CONTROLS
- -- ----.- --
A) Conrrol Panel
B) Oth~>r Controls
Asst2rnb 1 ing the Freezer 8, 9, 9a
SANIT 1 Z I I:(; THE FREEZER
.-.- 10, 10a
Routine, Periodic Cleaning Procedures 13
START1 NG TtiE FREEZER
GENERAL INFORMATION
Gravity Feed-Valve and How to Operate
12
:low to Adjust the Gravity Feed Valve 12
TEChS1CF.-L DATA 14
A) Rcfr-igcrztion - Compressor, Beater Motor 14
Adjustiny Product Temperature 14
Hw to Ad just Hear Micro Switch 15, 16
Cue.-Cut Arnperaqe 14
WAiiT4 1 KG 16
Hard-0-Matit Springs 16
Mix Tank Refrigeration 17
Energy Conservation Switch 17
a) How It Operates
b) Calibration of Temperature in
Cylinder 17
c) Calibration of Temperature in
Hopper 17