EasyManuals Logo

Coleman Riverside 12’x9' User Manual

Coleman Riverside 12’x9'
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Connect Frame to Tent
–Insert the pin into the end of the
main tent pole at tent’s edge. (illus. 3 & 4)
–Go to opposite end of pole and
gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the opposite pole end.
–Repeat for second main pole.
Riverside
12’x9’
1
Layout & Positioning
of Tent, Pole Assembly
–Layout and position tent with doors
facing desired direction. (illus. 1)
–Unzip doors.
–Stake down tent corners only, using the
stake loops. Keep the floor taut.
(Intermediate loops will be staked later.)
–Assemble frame poles by interlocking
shock-corded poles. (two poles)
–Insert the main pole straight through the
pole sleeves on the tent. (illus. 1)
2
When You Are Ready To Set
Up Your Tent
–Select a level campsite clear of
rocks, branches and other hard or
sharp objects.
–Do not set up your tent under trees.
–For best results in windy conditions,
position the end of tent into the wind.
See owners manual for more tips.
Assembled
Black main
poles
inserted
through
pole sleeves
Instructions apply to Part Number 9163-129
illus. 1
illus. 2
Tent stake
through
stake loop
illus. 4
Tent frame set-up
Main Poles
Part No. 9163-103
Rainfly Poles
Part No. 9163-104
illus.3
Insert pin
into pole end
Rainfly
Part No. 9163-102
Main Tent Poles
Main Pole
Main Pole

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Coleman Riverside 12’x9' and is the answer not in the manual?

Coleman Riverside 12’x9' Specifications

General IconGeneral
BrandColeman
ModelRiverside 12’x9'
CategoryTent
LanguageEnglish

Related product manuals