Coleman SUNDOME 7’x7’ User Manual

Connect Frame to Tent
–Insert one end of main tent pole end
onto pin of ring and pin system, at tent
corner. (illus. 4)
–Go to opposite end of pole and
gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the pole
–Repeat for second pole
SUNDOME
™
7’x7’
1
Layout & Positioning
of Tent, Pole
Assembly
–Layout and position tent with door
facing desired direction. (illus. 1)
–Unzip door
–Stake down tent corners only, using the
rings at the end of the stake loops.
Keep the floor taut.
–Assemble Frame Poles by
interlocking shock-corded poles.
This will make two long poles.
–Insert the poles diagonally into Pole
Sleeves.The center of the poles should
cross forming an “X” in the middle of
tent. (illus. 1)
–Fasten Frame Tie on top of tent over
both poles. (illus. 1), (illus. 3)
2
When You Are Ready To Set Up
Your Tent
–Select a level campsite clear of rocks,
branches and other hard or sharp objects.
–Do not set up your tent under trees. ™
–For best results in windy conditions,
position the end of tent into the wind.
–See owners manual for more tips.
Rainfly Pole
Part No. 9260M704
Main Tent
Poles
POLE ASSEMBLY PARTS
Assembled
poles
inserted
through
pole
sleeves
Frame Tie
Instructions apply to Part Number 9260N707
illus. 1
illus. 2 Tent stake
through ring
illus.4
Insert pole end onto
pin & ring
illus. 5
Tent frame
set-up
illus. 3
Frame Tie
Part No. 9260A702
Part No. 9260-703
Rainfly

Coleman SUNDOME 7’x7’ Specifications

General

Brand	Coleman
Model	SUNDOME 7’x7’
Category	Tent
Language	English

Summary

Tent Pole Assembly Parts

Main Tent Poles

Details the main tent poles, including part number 9260A702 for assembly.

Rainfly Pole

Specifies the rainfly pole, identified by part number 9260-703.

Rainfly

Lists the rainfly component, with part number 9260M704.

Tent Setup: Layout and Pole Assembly

Positioning and Initial Staking

Guide on positioning the tent, unzipping the door, and staking corners.

Frame Pole Assembly

Instructions for assembling the shock-corded frame poles into two long poles.

Inserting Poles and Securing Frame Tie

Details on inserting poles diagonally and fastening the frame tie.

Tent Setup: Connecting Frame to Tent

Connecting First Pole

Instructions for inserting one end of a main tent pole into the pin and ring system.

Connecting Second Pole

Steps to form an arch with the pole and insert the other end into the pin.

Tent Setup: Attaching Tent to Frame and Rainfly

Attaching Frame Clips

Guide on attaching frame clips along tent edges to the frame poles.

Attaching Rainfly Pole

Instructions for assembling and inserting the rainfly pole into pockets.

Securing Rainfly

Steps for tying the rainfly, draping it over the frame, and securing with ties.

Using Guylines

Guidance on staking out the tent using side guylines.

Important Usage and Care Information

Condensation Management

Explains condensation formation and how to minimize it through ventilation.

UV Exposure Warning

Caution against leaving the tent set up for extended periods due to UV damage.

Flame and Heat Precautions

Warning to keep flame and heat sources away from tent fabric.

Storage and Maintenance

Advice on drying the tent before storage and not telescoping poles.