Need help?Do you have a question about the Colortrac SmartLF Ci 40C and is the answer not in the manual?
Details on connecting power supply and interface cables (USB/Ethernet) to the scanner.
Steps for connecting the scanner to the computer and initiating driver installation.
Guide to installing the main scanning software from the provided CD.
Procedure for placing documents into the scanner via its control panel.
Basic steps to perform the initial scan using the SmartLF software.
Overview of 'Scan-to-File', 'Scan-to-Copy', and 'Scan-to-Email' features.
Procedure for cleaning the scanner's optical sensor glass for optimal image quality.
Instructions on how to clean the scanner's internal paper transport roller.
Performing white point calibration using the Ci Utilities for sensor accuracy.
Procedures for checking and correcting sensor alignment (stitching).
Installing the necessary driver for network connectivity via Ethernet.
How to view and modify the scanner's IP address settings.
Configuring network IP settings within the SmartLF All-In-One software.
A list of frequently encountered issues and their solutions.
Symptoms that suggest the need for regular maintenance tasks.
Minimum PC specifications for optimal scanner performance.
General| Scan Technology | CCD |
|---|---|
| Interface | USB 3.0 |
| Scanner Type | Large Format Scanner |
| Maximum Scan Width | 40 inches |
| Color Depth | 48-bit color |
| Supported Media Types | Paper, film, vellum |
| Power Requirements | 100-240V AC, 50/60Hz |
To Next Page