Do you have a question about the Colortrac SmartLF Cx40m and is the answer not in the manual?
Details the three models (Cx40m, Cx40c, Cx40e) covered in the manual.
Alerts users to electrical, mechanical, weight, and rotating roller hazards.
Confirms scanner compliance with EMC and FCC standards for interference.
Step-by-step instructions to remove the left-side end cover of the scanner.
Step-by-step instructions to remove the right-side end cover of the scanner.
Procedure to open the rear access panel for internal component access.
Steps to remove the top lid cover to access paper handling mechanisms.
Instructions for detaching the paper guide assembly from the scanner.
Steps to correctly re-install the paper guide assembly.
Detailed steps for removing and installing the control panel or display board.
Guide for removing and replacing the scanner's glass and CIS components.
Steps to safely detach the main logic board from the scanner.
Procedure for removing the Power Supply Unit (PSU).
Instructions for installing a new or the existing Power Supply Unit.
Steps to remove and replace the scanner's main timing belt.
Guide to removing and refitting the paper hold-down rollers.
Procedure for removing and replacing the pinch roller assembly.
Detailed steps for removing and installing the scanner's motor.
Instructions for removing and replacing the scanner's drive rollers.
Steps to remove, replace, and reconnect paper sensor components.
Guide to diagnosing common scanner faults and their corresponding repair codes.
| Model | SmartLF Cx40m |
|---|---|
| Scanner Type | Large Format Scanner |
| Color Depth | 48-bit input, 24-bit output |
| Weight | 110 lbs (50 kg) |
| Scanning Technology | CCD (Charge-Coupled Device) |
| Maximum Scan Width | 40 inches (101.6 cm) |
| Interface | USB 2.0 |
| Maximum Document Size | 40 inches (101.6 cm) wide, length is virtually unlimited |
| Operating System Compatibility | Windows 10 |
| Connectivity | USB 2.0 |












Loading...