Automatic scrubber RA 43K 40
Automatic scrubber RA 55K 40
3
1 General
1.1 About this operating manual
This operating manual contains important information for those concerned with the set up and use of the appliance
and is designed to ensure safe and proper use of the equipment.
Prerequisite for this is the knowledge of the safety aspects to be observed for installation and use as well as the
maintenance of the machine. Therefore please start by reading the instructions in the chapter "Safety". The
subsequent chapters are further focal points of information for the personnel.
To avoid improper use, this operating manual should be kept near the machine and must be available to those
concerned with the machine at all times. The accident prevention measures and general safety regulations must be
always observed when using the machine.
NOTE!
The drawings shown in this manual may differ slightly from the actual design of the machine.
As well as this operating manual, the manufacturers' instructions relating to the integrated components must also
be observed. Particular attention should be given to the notes relating to safety instructions.
1.2 Manufacturer
Address: Contact:
G. Staehle GmbH u. Co. KG
columbus Reinigungsmaschinen
P.O. Box 50 09 60
D-70 339 Stuttgart
Mercedesstraße 15
D-70 372 Stuttgart
Phone: +49(0)711 / 95 44-950
Fax: +49(0)711 / 95 44 -941
e-mail: info@columbus-clean.com
Internet: www.columbus-clean.com
1.3 Liability and Warranty
All details and information concerning operation, maintenance and cleaning of the equipment is true according to
our existing experience and to the best of our knowledge.
We reserve the right to make technical improvements within the scope of the further development of the appliance
described in this operating manual.
The translations provided are correct to the best of our knowledge. However, we cannot accept liability for any
translation errors. Legally authoritative is the German version of the operating manual supplied herewith.
The text and illustrations may not be identical to the goods supplied. The drawings and charts are not to scale 1:1.
Please read this operating manual carefully before starting the machine!
The manufacturer does not accept any liability for damage or failure due to non-observance of this operating
manual.
It is not permitted to communicate the information in this operating manual to a third party. Any such action will lead
to claims for compensation.
1.4 Explanation of symbols
Important hints, such as safety instructions, are marked with the appropriate symbols.
These instructions must be followed exactly to avoid accidents or damage to the appliance.
WARNING!
This symbol is used to mark all safety instructions in this operating manual, the non-observance of
which could result in injury or death. Please follow these safety instructions exactly and take
particular care in these cases.
To Next Page
Loading...
