On the upper part of the display, you will see the total operating time. The line visualised shows the
operating hours; the number consists of five figures, plus one figure after the point “.” to show the tenth of
an hour.
The battery indicator uses LEDs and has 8 positions (7 yellow - charged batteries, and 1 red - run down
batteries).
WARNING: A few seconds after the red indicator light comes on, the brush
motor switches off automatically. With the remaining charge it is possible to
complete the drying process before recharging
12. DIGITAL HOUR METER (E VERSION)
On the upper part of the display, you will see the total operating time. The line visualised shows the
operating hours; the number consists of five figures, plus one figure after the point “.” to show the tenth of
an hour.
13. RECOVERY TANK
Make sure the dirty water recovery tank is empty; if necessary, empty it completely.
Check the drainage tube cap (1) - in the front part of the machine - is correctly closed and fitted.
14. SOLUTION TANK
The dirty water recovery tank must be completely emptied each time the solution tank is filled. Check the
solution filter cap (1) - included in the optional solenoid valve kit - behind the brush head, is correctly
closed.
Check the solution filter (2) in the filling nozzle - in the front part of the machine - is correctly positioned.
1
2
To Next Page
Loading...
