16
• Electronic Programme Guide EPG (up to 14 days in advance,
channel-dependent)
• SCPC/MCPC reception standard C/Ku-band satellites
• Automatic selection of the TV standard with video converter
• Digital satellite finder for optical and acoustic adjustment of the
paraboloidal-type reflector
Connecting the receiver
The receiver is connected with your satellite antenna by means of a
coaxial cable. If necessary, you will have to prepare a coaxial cable
before connecting the receiver.
L
The coaxial cable is not included in the scope of supply.
Caution!
Connect the receiver to the mains supply only after you have
connected it to all equipment and the antenna properly.
Otherwise, the receiver can suffer damages.
The wire netting and the inner core of the coaxial cable carry
current during operation.
To Next Page
Loading...
