42
The system is not connected properly.
Check connection of the SCART cable
Dark screen
The TV set is not in AV mode.
Switch the TV set to the respective AV input.
The antenna is not directed exactly towards the satellite.
Direct the antenna more precisely. For this purpose, use
the “Info” key on the remote control. The signal strength
will be displayed for directing the antenna properly.
Poor image, blocking
error, formation of
small blocks, sound
stops
The LNB is defective. Replace the LNB.
No image, no sound,
signal strength and
signal quality OK
The satellite antenna has been directed to a wrong
satellite.
Bad reception of:
DSF, Tele5, etc.
Wireless telephone is disturbing (DECT standard). Move
your telephone to another place.
The batteries are exhausted.
Replace the batteries.
The remote control
does not work
The remote control is not directed properly.
Aim the remote control towards the front side of the
receiver and ensure that there is no obstacle between
the remote control and the receiver.
Channel has a new
frequency
Delete the TV channel, then scan automatically.
If a malfunction cannot be rectified in spite of this, please contact
your specialised dealer or the manufacturer.
To Next Page
Loading...
