ComAp IG-NT-BB - RS232, RS485, and CAN Bus Modes

IGS-NT Installation Guide
55
7.4. IG-NT-BB
7.4.1. Schematics
LB 8
InteliGen
NT
(1)
EXTENSION
MODULES
INTERCONTROLLER
& MONITORING
DISPLAY
L
H
L
H
BaseBox
( PROG. CNTRL.)
4XC2
Made in EU, Czech Republic
Order code: IG-NT-BB
8
MAX 0,74 A
8
8
8

Left to right: Pull down Bias / 120Ω / Pull up Bias / 120Ω / 120Ω

Down: AI4 setting / AI3 setting / AI2 setting / AI1
setting
Current input 0-25mA
Voltage input 0-5V
Resistance input 0-2400 Ω
SG OUT setting
PWM VoutR VOut
For more info see the chapter
Speed Governor Output

Boot jumper (upper one, rest of the jumpers is for internal use only)


