ComAp IG-NTC GC

ComAp a.s.
U Uranie 1612/14a, Prague 7, Czech Republic
Tel: +420 246 012 111, Fax: +266 31 66 47
E-mail: info@comap-control.com, www.comap-control.com
REFERENCE GUIDE
Compact Controller for Stand-by and Parallel Operating Gen-sets
Inteli New Technology
Modular Gen-set Controller
Bank Controller
IG-NT GC, IG-NTC GC, IS-NT-BB,IG-NT-BB, IG-NTC-BB, IS-NTC-BB
Software version IGS-NT-BC-1.2.0, January 2019

ComAp IG-NTC GC Specifications

General

Protection Rating	IP20
Weight	0.5 kg
Operating Temperature Range	-20°C to +70°C
Communication	CAN, Ethernet
Communication Ports	CAN, Ethernet
Protection	Overvoltage, short circuit

Summary

Document Information

Document History

Details the version history and release dates of the documentation.

Available Related Documentation

General Guidelines and Safety

Manual Scope and Description

Defines the content and purpose of the reference guide.

Manual Purpose and Target Audience

Outlines the intended audience and goals of the manual.

Critical Safety Warnings and Notations

Highlights safety precautions, notations, and conformity declarations.

Available Firmware and Archive Sets

Bank Controller Compatibility

Details firmware, hardware, and archive compatibility for Bank Controllers.

Gen-set Controller Compatibility

Details firmware, hardware, and archive compatibility for Gen-set Controllers.

System Description with Bank Controller

Installation and Wiring

CAN Bus Wiring

Explains inter-controller and interbank CAN bus connections.

Power Lines Wiring

Describes the two methods for wiring power lines to gensets.

AC Measurement

BCB Control and Synchronizing

Controller Functions

Operating Modes (OFF-MAN-AUT)

Describes the OFF, MAN, and AUT operating modes of the controller.

Active and Reactive Power Control

Explains system control of active and reactive power by the Bank Controller.

System Power Management

Details how Power Management decides gen-set operation for efficiency and load.