To Next PageTo Next Page
Need help?Do you have a question about the ComAp InteliGen NTC and is the answer not in the manual?
General| Brand | ComAp |
|---|---|
| Model | InteliGen NTC |
| Category | Controller |
| Language | English |
Defines document scope and key terms used throughout the guide.
Details communication ports, peripherals, and jumpers for various ComAp controller models.
Covers RS232, USB, RS485, Ethernet for single gen-set monitoring.
Details connections for multiple gen-sets via RS485, I-LB+, IB-NT, Ethernet.
Details Modbus connections for single and multiple gen-sets.
Setup for direct internet connection via Ethernet.
Connection via AirGate server for controllers without static IP.
Web-based monitoring and control via WebSupervisor and web interface.
Connecting via cellular network, including IB-NT bridge.
Configuration for modem connections for single and multiple gen-sets.
Controller functions for active call, SMS, and e-mail notifications.
Information on InteliVision displays and their connection.
Details I-LB+, IG-IB, I-CR, I-CR-R modules for CAN bus, internet, redundancy.
Details cables, CAN/RS485 standards, and RS485 termination.
Lists recommended modems and various converters.
Explains SMS commands and detailed Modbus connection procedures.
Reading alarms, history, Modbus objects, and command examples.
Modbus error lists, data types, and communication status.
