To Next PageTo Next Page
Need help?Do you have a question about the ComAp InteliGen NT and is the answer not in the manual?
General| Binary Outputs | Up to 8 |
|---|---|
| Analog Inputs | Up to 8 |
| Analog Outputs | Up to 4 |
| Weight | Approx. 0.5 kg |
| Communication Ports | RS232, RS485, Ethernet, USB |
| Inputs | Analog inputs |
| Outputs | Analog outputs |
| Supported Protocols | Modbus |
Lists PDF files and their descriptions for related documentation for the controllers.
Covers RS232, USB, modem, and controller programming problems.
Addresses issues with setpoints, buttons, display, and initialization.
Details problems with voltage, GCB opening, sync failures, and MGCB status.
Explains issues with load sharing, equalization, and load shedding.
Covers incorrect voltage/current readings due to CT/VT ratio settings.
Addresses incorrect active/reactive power and PF values due to CT connection.
Discusses SummerTime Mode issues, update errors, and statistic values.
Covers forgotten passwords, access rights, PID regulator behavior, and breaker fail alarms.
Guides on configuring controllers for SSB and SPM applications.
Provides definitions for technical terms and acronyms used in the manual.
Details errors related to BIN, ANA, BOUT, AOUT, ECU, SHBIN, SHAIN modules.
Covers alarms for wrong configuration, RTC battery, system messages, and password issues.
Lists alarms for voltage unbalance, frequency deviations, and phase sequence errors.
Includes alarms for breaker failures, sync timeouts, and overload conditions.
