To Next PageTo Next Page
Need help?Do you have a question about the ComAp InteliMains NT and is the answer not in the manual?
General| Brand | ComAp |
|---|---|
| Model | InteliMains NT |
| Category | Controller |
| Language | English |
Describes how to connect a PC directly to a single gen-set for communication.
Explains direct PC connection methods for multiple gen-sets.
Details how to monitor controllers locally using the Modbus protocol.
Covers Modbus communication strategies for multiple gen-sets.
Describes direct internet connection setup for remote monitoring.
Explains using AirGate for internet connectivity without a public IP.
Introduces WebSupervisor for web-based monitoring and control of controllers.
Details accessing and using the controller's web interface for monitoring.
Covers internet connectivity using cellular networks via InternetBridge-NT.
Details the I-LB+ module for CAN bus communication and its configuration.
Provides recommendations for proper CAN and RS485 bus connections.
Details the requirements for a correct CAN bus connection.
Outlines the specifications and requirements for RS485 connections.
Explains the importance and placement of termination resistors for RS485.
Details the function and installation of bias resistors for RS485.
Lists recommended cables for various communication interfaces.
Specifies recommended cables and types for RS485 connections.
Details specifications for CAN bus cables.
Describes RS232 cable requirements for controller communication.
Explains how to send commands via SMS to controllers.
Defines the format for specifying controller addresses in SMS commands.
Introduces Modbus communication protocols and their implementation.
Explains Modbus data reading procedures using multiple registers.
Details Modbus data writing procedures using single or multiple registers.
Provides a step-by-step guide for establishing Modbus connection.
Highlights crucial setpoints required for Modbus configuration.
Provides a detailed description of the Modbus protocol.
Explains the Modbus TCP protocol specifics.
Details the Modbus RTU protocol and its parameters.
